Publicité
Les langues disponibles
Les langues disponibles
V
L
E N T U R E
I G H T I N G ' S
Before You Begin
READ THESE INSTRUCTIONS COMPLETELY AND CAREFULLY
UNPACKING
Unpack and carefully examine the product.
Report any damage and save all packing materials if any part(s) were damaged during shipping.
Do not attempt to install or use this equipment if it is damaged.
INCLUDED IN THIS BOX
LED Fixture
Carabiner and Safety Cable
Installation instructions
–
WARNING
Failure to follow these instructions or altering equipment could result in injury or damage and void warranty. Venture assumes no liability for injury, damages
or losses of any kind that may arise from the improper, careless, or negligent installation, handling or use of this product.
This equipment must be installed and serviced per applicable codes and ordinances by qualified personnel (ex. licensed electrician) familiar with the
operation of the product and any hazards involved.
Disconnect power to the equipment and allow to cool before installing or servicing.
Handle sharp edges with care. To prevent wiring damage, do not expose wiring to sharp edges.
Verify that all electrical connections have been properly made and the fixture is grounded to avoid potential electrical shocks.
It is the installers responsibility to confirm the proper input voltage is used with this equipment.
Do not handle energized equipment when hands are wet, when standing on wet surfaces, or in water.
This fixture must be mounted securely to a structure to support the weight.
SUPPLIER'S DECLARATION OF CONFORMITY (SDoC)
This equipment complies with the limits for a Class A digital device, pursuant to Part 15 Subpart B of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial, industrial, or business environment.
This equipment complies with the limits for a Class A lighting equipment, pursuant to Innovation, Science and Economic Development Canada's CAN ICES-005
(A) / NMB-005 (A).
For warranty information refer to www.venturelighting.com/resources/warranties.
IMPORTANT SAFETY INFORMATION
Operating temperature: -40°C to +40°C (-40°F to +104°F).
Suitable for use in wet locations.
All wiring and connectors used with this equipment shall be rated a minimum of 75°C (167°F).
(800) 451-2606 VentureLighting.com
S
P
-
E L E C T
RO
RISK OF FIRE, ELECTRIC SHOCK, INJURY, OR PROPERTY DAMAGE
M
H
O D E R N
I G H B A Y
U
M
SER
ANUAL
Publicité
Table des Matières
Sommaire des Matières pour Venture Lighting SELECT-PRO MODERN HIGHBAY
- Page 1 E N T U R E I G H T I N G ’ S E L E C T O D E R N I G H B A Y ANUAL Before You Begin READ THESE INSTRUCTIONS COMPLETELY AND CAREFULLY UNPACKING Unpack and carefully examine the product.
-
Page 2: Installation Instructions
Installation Instructions Disconnect power from the luminaire and follow proper lockout/tagout procedures before beginning installation or maintenance. Remove the existing luminaire (if present) and dispose of per local requirements. Default CCT – 5000K; Default Wattage - Highest. Use selector switch to choose CCT and Wattage setting. (Figure 1) Attach safety cable to screw hole on fixture. -
Page 3: Wiring Diagram
Power can now be restored to the system. Wiring Diagram: (800) 451-2606 6675 Parkland Blvd., Suite 100 Solon, Ohio 44139 USA E-mail: Venture_Lighting@VentureLighting.com VentureLighting.com ©2022 Venture Lighting International Venture Lighting is a registered trademark of Venture Lighting International. AK0061-B ... -
Page 4: Avant De Commencer
E N T U R E I G H T I N G ’ S E L E C T O D E R N I G H B A Y ANUEL TILISATEUR AVANT DE COMMENCER LISEZ CES INSTRUCTIONS COMPLÈTEMENT ET ATTENTIVEMENT DÉBALLAGE Déballez et examinez soigneusement le produit. - Page 5 instructions d'installation Débranchez l'alimentation du luminaire et suivez les procédures de verrouillage/étiquetage appropriées avant de commencer l'installation ou la maintenance. Retirez le luminaire existant (le cas échéant) et jetez-le conformément aux exigences locales. CCT par défaut – 5000K; Puissance par défaut - Highest. Utilisez le sélecteur pour choisir le réglage CCT et Wattage.
- Page 6 Figure 6 L'alimentation peut maintenant être rétablie dans le système. (800) 451-2606 6675 Parkland Blvd., Suite 100 Solon, Ohio 44139 USA E-mail: Venture_Lighting@VentureLighting.com VentureLighting.com ©2022 Venture Lighting International Venture Lighting is a registered trademark of Venture Lighting International. AK0061-B ...