SMART D447313XA Mode D'emploi page 7

SMART Remote Programmer
POWER ON (F) (Fig.3)
This bu on works only if the device is powered by the ba eries; press bu on to power on, hold it for more
than 3 seconds to power off . If the device is powered from a PC using the USB cable the device is always on.
RESET G (Fig.3)
Use if the device is not responding to programming instruc ons.
LED
There are 2 leds on the device
RED led (D): (Fig.3)
- fi xed light: device is on;
- blinking light : device is receiving and transmi ng data
BLUE led (E): (Fig.3)
- fi xed light: device connected to mobile device via Bluetooth;
- blinking light: device is disconnected
The SMART Remote Programmer can be connected in following ways:
- Via a USB to a PC using the appropriate so ware available on www.silca.biz/www.ilco.us
- Via Bluetooth 4.0 to Android or IOS mobile devices
USING THE SMART REMOTE PROGRAMMER
Procedure for using the Smart Remote Programmer with a PC:
A er having installed the appropriate so ware on the PC switch on the Smart Remote Programmer connec-
ng it with the USB cable to a PC.
- On the PC open the Smart Remote Programmer so ware and check that the device is connected (a message
appears on the screen, if the message says "drivers not installed" please install the drivers by opening the
folder "drivers" in the Smart Remote Programmer fi le. Restart the program)
- Select the search func ons by clicking the
- Select the car model needed to preset the remote
- Place the new Ilco/Silca remote key on area "B" of the device
- Select "programming the remote"
- The device will preset the Ilco/Silca new remote ready for programming in the vehicle
Procedure for using Smart Remote Programmer with a Smartphone or Tablet:
- Switch on the Smart Remote Programmer by pressing bu on "F" (check that the ba eries are installed) and
the red LED "D" is lit.
- Switch on the bluetooth connec on on the smartphone or tablet
- A er star ng the App the user will be guided through the process to connect the Smart Remote Program-
mer
- Open the main menu by clicking icon at the top of the screen
- Select the Search func on
- Select the car model needed to preset the remote
- Place the new Ilco/Silca remote key on area "B" of the device
- Select "programm bu on" on the screen and follow the instruc ons given
- The device will preset the Ilco/Silca new remote ready for programming in the vehicle
FEATURES
at the top of the screen
on the screen and follow the instruc ons given
Copyright Silca S.p.A 2016
English
7