Getting Started - DNT Snakoo Mode D'emploi

Operation

Getting started

Software installation
Don't connect the inspection camera to the USB port
Insert the CD into the CD drive.
If the Setup-Assistant doesn´t start automatically please open the Telescope Driver.exe.
Continue the software installation, if the Microsoft logo test window appears.
At the end click Finish button.
If you have a older OS installed, lik Windows98SE, it might be necessary to restart the PC
Connect the endoscope to the USB-Port of your computer .
Your computer opens the Assistant for the search of new hardware. Please choose Install Software
automatically and click Next.
Windows opens a Message that says the program failed the Windows-Logo-Test. This message just
means that Windows doesn´t know the software. You can go on with the installation by clicking next.
Click Finish to fi nish the installation. You can use the endoscope now.
Start-up
Start the program AMcap.
If you have more than one camera installed one your computer, an error message appears "
Cannot add vicap to fi ltergraph". Choose the Telescope driver in the menu item „Devices" .
Bedienung
Inspect the inspection camera before use and correct any problems to
reduce the risk of serious injury from electric shock and other causes and
prevent tool damage.
When you press the snapshot button on the endoscope, you can take a photo and the program "SnapShot
Reader" opens automatically to show the photo.
File: Save the photo
Exit (X): Exit the program
Rotate Orientation:You can turn the photo arround.
Program description
File
Set Capture File: Make a AVI-File to store exposures on the camera.
Allocate File Size: Choose how much Memory-Space you can use for the photographs.
Save Captured Video: Choose where you want to store the videofi les..
Exit: Close the program
.
- 12 -