Installation Guide - TypeS BT530028 Directives D'utilisation Et D'entretien

9. Put the vehicle in reverse. If you can see clear picture, put the vehicle back in park and turn the key
to the off position. You are now ready for final steps.
10. Use the provided zip ties to secure wires neatly within your car.
11. Replace the light socket back into the reverse light housing.
12. Replace any interior panels that may have been removed to access the taillight and close your
trunk or rear hatch.
HD BACKUP CAMERA INSTALLATION
1. Peel off the cover of the double-sided tape from the HD Backup Camera and attach the Camera to
the license plate. Press firmly to the license plate to secure the Camera.
RECOMMENDATION: Thoroughly clean & dry the mounting surface area of the license plate
2. Press the license plate and the Camera firmly to the car to secure and get full contact between the
license plate and the double-sided tape. Screw the license plate back onto the rear of your vehicle.
3. As a last check, note the position of the view from the Camera when you place the vehicle in
reverse. Adjust the position of the Camera as necessary to achieve the best rear view.
before attaching.

7. INSTALLATION GUIDE

7