Winplus 689101 Directives D'utilisation Et D'entretien page 8

Instructions
Mounting on wall
1. Find a suitable indoor wall (wood)
location to mount the power station.
Tip: Attach the power station to the
wall above your workbench, and
position the lights to provide work
lighting for small tasks.
2. Locate the mounting plate and use
a bubble level to level it on the wall
surface.
3. Drill the 3/32-inch / 2.4 mm diameter
pilot hole, for the four corners of
mounting plate. Then use the 4
wood screws and screwdriver to
attach the mounting plate onto the
wall. Do not over-tighten the screws
- snug tight only.
8