LUND Ventvisor Elite 184249 Instructions D'installation

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

For proper installation and best possible fit, please read all instructions BEFORE you begin.
For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219.
Important Safety Information
• CAUTION - Before driving, ensure that the vent visor is properly secured to vehicle.
• Do not use automatic "brush-style" car washes.
• Do not use cleaning solvents of any kind.
• Periodically check all components for tightness.
Contents - 2 Piece Set
Front Driver
Side Visor
Contents - 4 Piece Set
Front Driver
Side Visor
Tools Required
Preparation Before Painting / Installation
• A trial fit is recommended to ensure proper positioning and fit.
• Check fit of parts before painting as we will not accept the return of modified or painted parts.
• Wash and dry your vehicle to remove any debris and/or dirt from the installation area.
Installation Steps
Roll down window. Buff the inside felt surface
with scotch brite pad. Then clean with alcohol
clean
1
NOTE: visors mount on the inside of the window
Installation Instructions
Ventvisor Elite
NOTE: Actual product may vary from illustration.
Front Passenger
Side Visor
Front Passenger
Side Visor
Car Wash Supplies
NOTE: Actual application may vary slightly from illustrations.
pad.
inside of vehicle
channel.
Alcohol Pad x2
Rear Driver
Rear Passenger
Side Visor
Side Visor
Clean Towel
Remove tape liner from front & rear flange. Peel back
2" (5 cm) of tape line from each end of top flange.
2
Page 1 of 2
I - Sheet Number LUNDVV38 Rev.B
Scotch Brite
Pad
Scotch Brite
Alcohol Pad x4
top flange
free end
front
flange
Pad
rear
flange

Publicité

Table des Matières
loading

Sommaire des Matières pour LUND Ventvisor Elite 184249

  • Page 1 Installation Instructions I - Sheet Number LUNDVV38 Rev.B Ventvisor Elite ™ For proper installation and best possible fit, please read all instructions BEFORE you begin. For technical assistance or to obtain missing parts, please call Customer Relations at 1-800-241-7219. Important Safety Information •...
  • Page 2: Installation Steps

    Congratulations! You have purchased one of the many quality Lund ® branded products offered by Lund International, Inc. We take the utmost pride in our products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in terms of fit, durability, finish and ease of installation.
  • Page 3: Outils Nécessaires

    Instructions d’installation I – Feuille numéro LUNDVV38 Rév.B Ventvisor Elite ™ Pour obtenir une installation correcte et le meilleur ajustement possible, lire toutes les instructions AVANT de commencer. Pour toute assistance technique ou obtention de pièces manquantes, appeler le service des relations avec la clientèle au 1-800-241-7219.
  • Page 4: Étapes D'installation

    Félicitations ! Vous venez d'acheter un des nombreux produits de qualité de la marque Lund ® fabriqués par Lund International, Inc. Nous sommes extrêmement fiers de la qualité de nos produits et nous espérons que vous profiterez de cet investissement de longues années durant.
  • Page 5: Herramientas Necesarias

    Instrucciones de instalación Hoja informativa N.° LUNDVV38 Rev. B Ventvisor Elite ™ Para una instalación adecuada y el mejor ajuste posible, lea todas las instrucciones ANTES de comenzar. Si desea recibir asistencia técnica u obtener piezas faltantes, llame al Servicio al cliente al 1-800-241-7219. Información importante de seguridad •...
  • Page 6: Pasos De Instalación

    Felicidades Usted ha adquirido uno de los tantos productos de calidad de marca Lund ® que ofrece Lund International, Inc. Nos enorgullecen mucho nuestros productos y deseamos que disfrute años de satisfacción por su inversión. Nos hemos esforzado mucho para asegurarnos de que su producto sea de gran calidad en cuanto a ajuste, durabilidad, acabado y facilidad de instalación.

Ce manuel est également adapté pour:

Ventvisor elite 184733Ventvisor elite 184407

Table des Matières