Pairing Bluetooth Devices (One-Off); Volume Control; Turning Off Bluetooth Audio - Marmitek BOOMBOOM 565 Guide Utilisateur

PAIRING BLUETOOTH DEVICES (ONE-
OFF)
The BoomBoom 565 is able to remember up to 8 paired devices. As a
result, it is not necessary to pair a device every time you connect it. If
a 9 th device is paired with the BoomBoom 565, the device which has
been originally paired with the BoomBoom 565 will be deleted from
its memory.
1. Make sure the BoomBoom 565 is turned off.
2. Press and hold the Multi-function [9] button for 5 seconds to put
the BoomBoom 565 in pairing mode. Release the Multi-function
button as soon as the blue LED flashes.
3. Turn on a device that supports Bluetooth, such as an iPod,
iPhone, Android or mp3 player and go to: Settings > General >
Bluetooth. Click ON 'Bluetooth' and the BoomBoom 565 will
appear on the device. Click on 'BoomBoom 565'. The device is
now connected and paired with the headphones. If the device
prompts for a pairing code, enter:"0000".

VOLUME CONTROL

Tap VOLUME+ [10] to increase the volume. When maximum
1.
volume has been reached, a tone indicator will sound.
Tap VOLUME- [11] to decrease the volume. When minimal
2.
volume has been reached, a tone indicator will sound.
Press Next [12] or Previous [13] to listen to the next/previous
3.
track.

TURNING OFF BLUETOOTH AUDIO

Press and hold the power button for 5 seconds to turn off the
BoomBoom 565.
The headphones will turn off automatically after 10 minutes when no
device is connected to it.
The blue LED will turn off.
8 © MARMITEK