First Use; Wearing Style - Marmitek BOOMBOOM 565 Guide Utilisateur

Operation / State
Power on
Pairing mode
Switch off
Charging indicator
Charged
Connection
No connection
Calls
Busy

FIRST USE

The BoomBoom 565 has two built-in rechargeable batteries.
We recommend completely charging the batteries before using the
device for the first time. Connect the supplied USB cable to the
BoomBoom 565 and a PC, Mac or USB power adapter. The red LED
will light up.
The device may take up to 4 hours to charge for the first time. Once
the BoomBoom 565 batteries are completely charged, the red LED
will switch off.

WEARING STYLE

Watch the left and right indicators on the outside of the headband.
Please make sure that the operating buttons are always on the right
hand side while wearing the BoomBoom 565.
Adjust the fit of the BoomBoom 565 by changing the length of the
headband near the ear pads.
The ear pads may be rotated 90 degrees, allowing you to easily carry
and store the BoomBoom 565.
BoomBoom 565
LED Indication instructions
LED status indication
blue LED flashes slowly
blue LED flashes quickly
blue LED flashes, then
disappears
red LED on
red LED disappears
blue LED flashes slowly
blue LED flashes quickly
blue LED flashes
blue LED flashes
method / result
press the Multi-function key for 5s
press the power button for 5s
press the power button for 5s
USB cable connected
disconnect USB cable
flashes every 3s
flashes every 0.5s
press the Multi-function key to
answer
flashes every 5s
7