Connection; Connecting The Receiver - MC Crypt UHF-2032 Notice D'emploi

Connection

Connecting the Receiver

For output connections always use the appropriate shielded XLR or cinch cables. Other
unsuitable cables may lead to malfunctioning.
To avoid distortions or false adjustments that may damage the device, only connect devices
with an XLR input to the XLR output, or devices with a cinch input to the cinch output.
• Switch the receiver off. The POWER switch (2) must not be pressed, the indicator in the switch must not light up.
• Switch off the audio device (mixing desk or other) to which the receiver will be connected and disconnect it from
the mains.
• Connect the audio input of the audio device with one of the receiver's audio outputs.
When the signals of both transmitters are transmitted separately, connect the MIC-A (12) and MIC-B (11)
connections to two audio device inputs (e.g. mixer).
When the signals of both transmitters are transmitted together, connect the MIXED A/B connection (10) to the
input of an audio device.
• Insert the aerials supplied into the receiver's ANT A (1) and ANT.B (9) connections and fasten them by tightening
the cap nuts. Now align the surface exactly vertically.
27