Ribimex PRTOURBAT37 Manuel D'instructions Et D'utilisation page 9

3.1- General safety warnings
• Understand the product. Read and follow the instructions in this manual.
• Do not disassemble or modify the product.
• Do not use this product if it is not completely assembled or if any parts appear to be
loosened, missing or damaged.
• Use and store indoor dry environment.
• Maintain good housekeeping and sufficient lighting in the working area.
• Keep children and bystanders away while operating this product.
• Cleaning and user maintenance shall not be made by children.
• Use attachments/accessories specified by the manufacturer.
• Perform service maintenance by qualified personnel only.
3.2- Additional safety rules for electric power tool
• When the tool is not in use, performing cleaning and turn it off.
• Never leave the product running unattended. Operate the tool only when hand-held.
• Do not overreach. Keep proper footing and balance at all times.
• Do not force the power tool. Use the correct power tool for your application.
• Keep handles and grasping surfaces dry, clean and free from oil and grease.
• Dress properly. Keep hair, loose clothing, finger and any parts of body away from openings
or moving parts.
• To reduce the risk of electric shock, do not use near water or any liquid.
• Do not expose the tool to rain or wet conditions.
• Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust.
• Maintain labels and rating plate through the life of service.
• Do not use the power tool if the power button does not work normally.
• Stay alert, watch what you are doing.
• Do not use a power tool while you are tired or under the influence of drugs, alcohol or
medication.
• Do not abuse the charging cable. Never use the cable for carrying or pulling the power tool.
Keep the cable away from heat, oil, sharp edges or moving parts.
• Store idle power tool out of the reach of children and do not allow persons unfamiliar with
the power tool or these instructions to operate the power tool.
• Do not expose power tool, charger and or to rain or wet conditions.
3.3- Special warnings when using this product
• Use personal protective equipment. Always wear safety goggles and protective gloves when
using the tool.
• Do not use the tools in any operations that beyond the intended purpose.
• Hold power tool by insulated gripping surfaces, when performing an operation where the
fastener may contact hidden wiring.
• Use clamps or another practical way to secure and support the workpiece to a stable
platform.
• Charge the tool with the USB cable provided only.
• The built-in battery is not replacable. When it reached its end of life, the tool shall be
replaced.
• Charge the battery in ambient environment (+4 °C to +40 °C).
Page 9 / 18