Technical Data; On/Off Switch - Sinbo SHC 4343 Mode D'emploi

ENGLISH
INSTRUCTION MANUAL

TECHNICAL DATA

1
Operated input: AC230V, 50Hz
Power: 10W
4
2
KNOW YOU PRODUCTION
1. Cutting Head
3
2. Adjustment Lever

3. ON/OFF Switch

4. Hanging Loop
NOTICE:
Do not switch on before checking that voltage on the specifications plates is the same
as that in your home;
Switch off when not in use, even if for a moment;
If the supply cord is damaged, it must be replaced by the manufacturer of its service
agent or a similarly qualified person in order to avoid a hazard.
you never use the appliance with damp hands when plugged in (Danger of electric shock!).
The hair clipper only used for household!
HOW TO USE
Preparing the hair clipper:
Ensure that the ON/OFF switch of the device is set to "OFF". Unroll the cord and insert
the plug in a suitable socket (230V~).
Operating the hair clipper:
The fur to be cut must be dry and clean. Brush the fur carefully to remove any knots. Put
the comb attachment required on the cutting head with the tines pointing upwards and
press the lug into the lower metal edge of cutting head (see illustrations below).
Switch the appliance on by moving the ON/OFF switch upwards ("ON" position). We
recommend to trim a small area first to familiarize yourself with the individual comb
attachments. Start with a comb for long fur. Thereafter, use shorter combs if necessary.
The six comb attachments enable cutting lengths between 3 and 13 mm. Move the
appliance slowly and against growth direction through the fur. Hold the clipper in such
- 5 -