Team kalorik PSGR 2000 RI Mode D'emploi page 5

BEFORE USE
Each mill runs on 4 x AA batteries.
Place the On/Off switch on the Off position.
To open the unit and access the battery compartment, turn the mill upside down and
turn the plastic cap counterclockwise to unlock it. Once unlocked, simply lift the battery
compartment out from the unit.
Insert the batteries in such a way that the polarity of each battery is respected, and
matches with the symbol indicated on the battery cradle.
Check that the switch is on the Off position.
To close the battery housing, put the battery cradle back into the appliance, and
replace the cap turning it clockwise until it gets locked firmly.
To fill with pepper or salt:
1. With the pepper mill standing on its base, hold the black plastic part located
around the edges of the grinding head. Hold the part firmly and turn it
counterclockwise to uncover the salt/pepper chamber's opening.
2. Fill the transparent refill chamber with salt or pepper.
3. Close the grinding head by returning it back into its initial position, lock in place
by turning the black plastic part counter-clockwise, until the opening is
completely closed.
USE
Before seasoning your meals, you can adjust the fineness of the ground salt and pepper
by turning the adjustment wheel on the underside of the mill.
To do so, turn the wheel clockwise for a finer grind and counterclockwise for a coarser
grind.
Turn the On / Off switch to the "On" position to power on the unit.
Note: The On/Off switch doesn't need to be turned back to the "Off" position after each
use. Leave the switch on the "On" position for a convenient and easy use of the pepper
and salt mills. Turn the switch to the "Off" position before replacing batteries or if left
unused for a long period of time.
Hold the appliance above the meal to season. There is no button to push, grinding will
start automatically when the grinder is put upside down (gravity-activated and
automatic function).
5 PSGR 2000 RI