Pre-Installation; Determine Motor Mounting Location On The Ceiling - Proslat Garage Gator 68223 Instructions D'assemblage, D'entretien Et D'utilisation

Pre-Installation

Watch our installation video at proslat.com/pages/instructions
This is the best way to follow and understand the installation process.

Determine motor mounting location on the ceiling

□ Choose a location in your garage where you would like to install your Hoist – an unobstructed operating space of at least 3 feet by 4
feet is required. The motor mounting plate (A) should be installed at least 3 feet away from walls or any other obstructions and close to
a power supply (preferably a ceiling outlet).
□ The motorized hoist is designed to be installed either perpendicular or parallel to the ceiling joists and can be installed on joists with
16 in. or 24 in. spacing.
□ In the chosen installation area determine the direction of the ceiling joists and the exact location of the ceiling joists by visually
checking or using a joist finder or a very fine drill bit.
□ Four installation options are illustrated below. Note how the motor mounting plate (A) and motor hoist (B) are positioned for your
installation – in particular the location of the 4 fixed threaded bolts on the motor mounting plate and the 4 ½ in. spacer channel bar
attachment tab on the motor hoist. Determine how the motor mounting plate should be rotated – where the fixed, threaded bolts
should be located – prior to fastening to the joists. Identify your installation option.
Perpendicular to joist installations
OPTION A OPTION A
OPTION B OPTION B
OPTION C OPTION C
Parallel to joist installations
OPTION D OPTION D
6