Proslat Garage Gator 68223 Instructions D'assemblage, D'entretien Et D'utilisation page 15

Installation (continued)
8
Level
□ The height adjustment bracket (D) is adjustable to make your straps and bars perfectly level. Lower your straps to eye level and
adjust the pin in the height adjustment bracket (D) to the desired hole to make your straps level.
□ If your bar is not level, use the strap adjustment bracket that is located by the hook.
TO ADJUST, REMOVE THE COTTER PIN ON THE HIGHEST SIDE AND REINSTALL AT THE HIGHER HOLE.
□ If your bar is still not level, remove the first lower pin that you
have already installed and reinstall it without the strap at the
lowest level closest to the hook.
NOT LEVEL
□ Wrap the strap around the pin you installed and insert the
second pin at the desired hole through the hoop in the strap.
Adjust the second pin accordingly until your bar is level.
15
Please contact 1 888 691-2944 for further assistance.
PROSLAT.COM