Before First Use; Intended Use; Operation; Mounting Place - Westfalia 82 46 47 Mode D'emploi

Before first Use

Unpack the insect killer and check the unit for any damage in transit.
Dispose of packaging materials or store it out of reach of children. Plastic
bags etc. may become a deadly toy for children.

Intended Use

The insect killer is used to attract flying insects such as flies, moths and
mosquitoes to a UV light and then electrocute them with a high-voltage
grid.
UV-rays attract insects even in the winter. The insect killer can be
operated 24 hours a day throughout the year.
Only use the insect killer in closed rooms. The unit is not designed to be
used in barns or similar structures.
To protect endangered insect species this insect killer may only be
used indoors.
Insect killers are only intended for the protection from insects and
are not suited for household illumination.

Operation

1. Plug the power plug into a grounded socket.
2. Switch on the insect killer by pressing the ON/OFF switch (1). The unit
is now ready for use.
Insects which come in contact with the high-voltage grid will fall into
the collection tray (3).
For safe use, the outer housing prevents the operator not to touch the
high-voltage grid accidentally.
3. Grasp the collection tray on the right and left side and pull it forward in
order to empty it.
4. After cleaning, slide the collection tray back in place.

Mounting Place

The unit can be mounted by hanging from the ceiling, hanging on the wall
or standing upright.
If the room has approx. 150 m
Operation
2
, the insect killer can be hung in the center
13