Castel XE-AUDIO-10B Fiche Technique page 18

AUDIO VIDEO IP 6 PB - 10 PB DOOR ENTRY STATION
USE
Station IP address
Each station must have its own IP address on the network. This address will be either given by the network server
(DHCP addressing), that is manually configured. This addressing can be configured from a PC via the station's Web
server.
Note that the station is delivered by default with DHCP. If no DHCP server is present, the station will then use
a fixed IP address of the IP4All domain: 169.254.xx.xx
The station's IP address can be found from:
- CastelIPSearch application
- CastelServeur.
- ONVIF discovery software
If the station's IP address cannot be found:
- In factory settings mode, when pressing the 1
address
When the 'Soft Reset' push button is pressed briefly, the station announces its IP address
-
When the 'Soft Reset' push button is pressed for more than 3 seconds, the station bridges its IP
-
interfaces with a fixed IP of 192.168.49.251.
Station reset
When the 'Soft Reset' push button is pressed for more than 20 seconds, the station restarts and resets its parameters
to the factory settings.
When pressing the 'Hard Reset' button, the station restarts instantly.
Access to the station Web Server
To log into the station Web server, simply use a web browser such as Firefox, Chrome or Internet Explorer. You do
this by opening your Web browser from any PC on the network and typing: 'https://' followed by the IP address of the
entry station ([https://entry_station_ip_adresse]). You will then be directly connected to the entry station's Web
page. You only have to type in your login (by default: castel) and your password (by default: castel) to access the Web
server functions.
Note: for compatibility with Edge, the blocking of pop-ups must be disabled. To do this, go to 'Parameters', 'Advanced
parameters' then disable 'Block pop-ups'.
Online help accessible from all the menus can be used to find out about the different functions of the Web server.
MAINTENANCE
Your CASTEL product must only be cleaned using a mild cleaning product (water or soapy water) that is non-
abrasive, non-foaming and above all free from any type of solvent or alcohol.
For regular maintenance, only use water, without detergent.
Jet cleaning must be prohibited, as well as use of abrasive sponges and cloths with aggressive surfaces.
Technical data sheet no. 604-0091D
st
programmable button, the station announces its IP
www.castel.fr
FR
EN
Page 18 / 22