Important - Chicco Fast in Instructions D'installation

F I
Ast n
A
dAptor

IMPORTANT

READ CAREFUL-
LY AND KEEP FOR
FUTURE REFER-
ENCE
WARNING: BEFORE USE,
REMOVE AND DISPOSE OF
ALL PLASTIC BAGS AND
PACKAGING
AND KEEP THEM OUT OF
REACH OF CHILDREN.
WARNINGS
• WARNING: The adap-
tors can only be used
with the Chicco Mul-
tiRide Stroller.
• WARNING: Only CHIC-
CO KAILY and KIROS
I-SIZE FAST IN Child Car
Seats can be installed
- M
ultIrIde
-
MATERIALS
7
on these adapters.
• WARNING: Before use,
check correct fixing
of the adaptors to the
frame of the stroller.
• WARNING: Before use,
make sure that the child
car seat is correctly fit-
ted on the adaptors by
pulling it up.
• Keep adaptors out of
reach of children when
they are not in use.
INSTALLATION AND USE OF ADAPTORS
WITH THE CHICCO KAILY CHILD CAR SEAT
Before installing the adaptors on the stroller,
remove the bumper bar.
1. Place the adaptors on the frame of the stroller
(Fig. 1-1A) and fasten them in by closing the
plastic levers on each side. For correct attach-
ment, the two ends of the clip must wrap
around the rear leg tube coupling (Fig. 1B).
WARNING: Before installing the Child Car Seat,
check that the adaptors are mounted correctly.
2. To install the Chicco KAILY Child Car Seat,
recline the stroller's backrest and then insert
the lateral hooks of the child car seat into the
adaptors previously mounted (Fig. 2-2A). The
car seat should be fixed only and exclusively
facing parent.
3. To remove the Car Seat press the button on
the back and pull upwards (Fig. 3).
INSTALLATION AND USE OF ADAPTORS
WITH THE CHICCO KIROS I-SIZE FAST IN
CHILD CAR SEAT
Before installing the adaptor on the stroller, re-
move the bumper bar and place the adaptors
on the stroller frame as indicated in step 1.