Safco TASK MASTER 5110 Instructions De Montage

an LDI Company
New Hope, MN 55428
Visit us on the web:
www.safcoproducts.com
PARTS LIST PARTS LIST PARTS LIST PARTS LIST PARTS LIST
CODE
DESCRIPTION
Glide
A
B Base
C Cylinder
D Foot Ring
E Dust Cover (3 pc set)
Seat Assembly
F
G Back Assembly
H Knob with Cone Point
I Back Support Bar
Knob with Flat Point
J
Check all parts against Parts List before begin-
ning assembly. Allow all parts to warm to room
temperature prior to assembly.
Install a (A) Glide into each of the legs of the (B)
1
Base. Press firmly into place. Be sure the glide is in-
serted completely into leg for proper stability.
2 Insert the (C) Cylinder into the base, tapered end down.
Secure the cylinder by applying a little downward pres-
sure (CAUTION: When applying downward pressure,
avoid plastic button at top of cylinder, as pressure will
release pneumatic lift)
Slide (D) Foot Ring on to cylinder (ring side up), posi-
3
tion at desired height. Turn knob to secure. Place (E)
Dust Cover over exposed cylinder.
4 Install the (F) Seat Assembly by aligning the hole on
the underside with the shaft of the cylinder assembly;
push down firmly on seat.
5 Slide (I ) Back Support Bar into bracket on underside
of seat assembly. Use a standard screwdriver to de-
press push button near end of Back Support Bar and
slide Bar until push button locks into bracket. Remove
(H) Knob with Cone Point from parts bag. Thread Knob
into bracket and tighten to secure Back Support Bar in
proper position.
Make the final chair adjustments following the instruc-
6
tions on the reverse side.
5110-37MP: 1 of 6;
Rev. 3: 11/06 (7997.03)
TASK MASTER
A S S E M B L A S A S S E M B L Y Y Y Y Y S E M B L S E M B L
A S A S S E M B L
PRODUCT WARRANTY CARD is available online at: www.safcoproducts.com
QTY. PART NO.
5 5110-25
1 5105-54BL
1 5110-11
1 5110-06
1 5110-14
1 5110-51
1 5110-52
1 6680-78
1 6680-55
1 6680-77
For questions or concerns, please call the
available Monday-Friday 8:00 AM to 4:30 PM (Central Time) (English-speaking operators)
INDUSTRIAL CHAIR
®
(19" - 27" Range)
I N S T R U C T I O N S I N S T R U C T I O N S I N S T R U C T I O N S
I N S T R U C T I O N S I N S T R U C T I O N S
TOOLS REQUIRED: Standard Screwdriver
J
I
H
D
Safco Consumer Hot Line
Registered U.S. Patent D381,823
G
PARTS SHOWN IN BOX
ARE PRE-ASSEMBLED
E
5110
F
C
B
A
1-800-664-0042