If the drive behaves not as expected or you have doubts about the electrical
safety, please contact the TOSHIBA hotline or an authorised reseller
immediately!
System Requirements
Windows
■
CPU with 750 MHz or faster
■
10 MB system hard disk space
■
256 MB system memory
■
One free port of USB 3.0 or USB 2.0
■
NOTE
USB 3.0 is backward compatible with USB 2.0.
Installing the drive
Some information about bus-powered operation and the supplied USB cable:
Passive USB hubs or USB connectors like keyboards, mice or similar
■
products cannot be used or connected to the drive.
Make sure that the connectors will be inserted correctly.
■
Never use pressure for connecting the cables. Check the polarity before
■
connecting!
Installing and Removing the
Replaceable Plugs
To install and remove the AC adapter replaceable plugs, see the
illustrations below.
User's Manual
®
XP / VISTA
®
/Windows
®
7
STOR.E ALU 2S 3.5"
EN-5