Table des Matières
Publicité
Drive a 4" bracket screw through the bottom
end cap attachment bracket and the spacers to
secure the bottom of the screen housing to the
doorframe or brick mold.
Insert second housing screw into decorative
housing flange. Tighten all screws to hold frame
in place.
Pull the slider bar closed to verify the latch and
latch hook align properly. Latch hook can be
adjusted as needed with a hand screwdriver.
TIP: Latch hook can be oriented either hook up
or down to connect with latch.
TIP: Small gaps in between tracks or end caps
and the existing brick mold can be caulked.
8
Publicité
Table des Matières
