Requirements On The Set-Up Location; Before Initial Use - Powerfix Profi PHG 3000 C3 Mode D'emploi

Requirements on the set-up location

For safe and faultless operation of the appliance the set-up location must satisfy
the following criteria:
■ The appliance must be placed on a fi rm, fl at and horizontal surface.
■ Minimum spacings to the housing of 30 cm to the sides, 30 cm above, 30 cm
to the rear and 100 cm to the front must be maintained.
■ Do not place the appliance in a hot, wet or very moist environment or in the
vicinity of fl ammable materials.
■ The mains power socket must be easily accessable so that, in an emergency,
the mains power cable can be easily disconnected.
■ Environment temperature range: 0 to +40°C
■ Humidity (no condensation): 5 - 75 %
DANGER
Fire risk through contact with materials!
The risk of fi re exists if the heating elements come into contact
with fl ammable materials!
► Do not place the appliance in the vicinity of curtains and other fl ammable
materials.
► Do not allow fl ammable materials (i.e. draperies) to come into contact
with the appliance.
► Do not cover the appliance.

Before initial use

■ Remove all packaging materials and all transport securing appliances from the
appliance.
NOTICE
► With initial use, for a brief period, a light odour accumulation can occur.
This is normal and completely harmless.
PHG 3000 C3
GB
35