Washing Instructions - bem wireless EXO-200 Manuel De L'utilisateur

Poor/Uncomfortable Fit
• Try moving the hat to establish a comfortable position for the
speakers.
If issues persist, you can find additional suggestions and technical
support at bemwireless.com/support.

Washing Instructions

To keep your EXO Active Gear Headband working well and looking
sharp, you'll need to wash the headband from time to time. ALL
components (Control Panel and Speaker) MUST be removed before
washing. Failure to remove speaker components will damage or
destroy the electronics.
Remove Control Panel and Speaker Component.
1. The control panel is located in a small pocket inside the
headband. The control panel can be eased out of the pocket.
2. Ease the control panel out of its pocket and toward the
opening near the back, bottom of the headband until you can
remove it fully.
3. Repeat the above steps for the remaining speaker component.
13