Publicité
Les langues disponibles
Les langues disponibles
OPERATION
-
Before fi rst use, charge the
The maximum autonomy is reached after 3 complete charge-discharge cycles.
-
Power indicator on the base: green LED On.
The LEDs on the lamp blink to indicate charging. Once charging is complete, the LEDs are switched off.
-
When switched on, the lamp's intensity increases gradually to preserve LED lifetime.
-
The lamp's light intensity rises gradually when it is turned on to preserve the lifetime of the LEDs.
-
When the operating time left drops to 1/4 hour, the lamp switches off and switches on instantly every 15 seconds.
-
Batteries are sensitive to temperature: autonomy variations can occur at low temperatures
-
The charging system is fi tted with an automatic thermal circuit breaker.
-
The
inspection lamp resists to most products and solvents used in automotive
889 LN
repair and industrial shops (white spirit, petrol, diesel fuel, brake fl uid, engine oil).
MAINTENANCE
-
Never immerse the
889 LN
-
Use a dry cloth with soapy water to clean your
-
Use only USAG spare battery packs, reference
-
Using non-compliant packs or improper usage can cause leaks or an explosion which would damage the lamp.
-
Use only the
mains adapter supplied by USAG. Using other mains adapters can cause
889 L1
electrical hazard and start a fi re.
-
Before any prolonged use of the lamp, perform a full discharge-recharge cycle.
Ni-MH batteries are consumables not covered by the guarantee.
The lamp's autonomy is specifi ed for new batteries.
OPTION
889 L5
12 V / 24 V
889 LN4
+
inspection lamp for 3 hours.
889 LN
inspection lamp in a cleaning product.
inspection lamp.
889 LN
889 L2
889 L3
+
889 L2
Ni - MH
889 L1
889 L2
Publicité
