Maintenance - Heston Blumenthal Everdure HBG2GUS Instructions De Montage

Assembly, Operation & Maintenance Instructions
18

MAINTENANCE

It's recommended that you undertake the following maintenance program every 12 months
or prior to the use of your grill at the beginning of every BBQ season.
Note: Prior to undertaking any maintenance on your grill, please ensure your grill is cool.
1. Ensure the area around you gas grill is clear from combustible materials, gasoline and
other flammable liquids.
2. Do not obstruct the flow of combustion and ventilation air to and from your gas grill.
3. Checking and cleaning the burner rails, you need to ensure that all burner ports, burner
tubes are clear from insect nests, webs. A clogged tube can result in a fire below the
appliance.
PROCEDURE FURNACE GRILL: REMOVING THE
BURNER TUBES
Note: Please note the grill plates need to be removed before removing the burner tubes.
STEP 01
/ Remove the Phillip head screws x 3
STEP 02
/ Slide the burners toward the rear of the grill & remove ignition cables from the burner
assembly and lift the burner rail assembly out of the gas grill.
STEP 03
/ Inspect the burners for insect webs and nests or any other blockages, the burner tube &
ports can be cleaned with a thin piece of wire if required.
To replace the burner assembly repeat the above in the reverse order, ensure the burner
are seated correctly over the gas control outlets when replacing.