BLUEFIN Fitness KICK LITE Guide D'utilisation page 11

M A I N T E N A N C E
PROPER MAINTENANCE KEEPS YOUR TREADMILL IN OPTIMAL CONDITION, AND THE WRONG MAINTENANCE CAN HURT
OR SHORTEN THE LIFE OF THE TREADMILL.
WARNING: Always unplug the treadmill before cleaning or maintaining the treadmill!
1. Frequent inspections are required due to wear and damage of accessories (such as motors, electronic controls, power
cords, running belts).
2. Immediately replace the defective parts and repair the equipment (such as the power cord).
3. Pay special attention to the most easily worn components (such as running belts).
4. Clean the dust regularly to keep the each component clean.
5. After using the treadmill, use a clean towel or cloth to clean the console display and other parts of sweat and debris.
Please be careful not to splash water on the electrical components and the running belt.
6. Please put your treadmill in a clean and dry environment.
7. In order to move easily, the treadmill is equipped with wheels, please make sure to disconnect the power before moving
the treadmill.
8. In order to better maintain and extend the life of the treadmill, it is recommended that you stop the treadmill for 10
minutes after continuous use for 30 minutes.
9. The running belt has been adjusted before leaving the factory, but after using for a long time, the running blet will be
stretched and will be deviated from the center position, causing the running belt to rub the side bars and rear cover. It is
normal for the running belt to be forced to stretch during use.
//
E N
// //
K I C K L I T E K I C K L I T E 1 1