Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
STEP 3
Fix the Bed Slat Supports (E) to the bed slats (D) and Center Slats (H), then tighten
with JCBC Bolts (2) as shown. Install the bed slat (D) to Side Rail (F) & (G), and
tighten with Screws (6) as shown. (NOTE: THE SETUP MUST DONE AT THE
DECIDED LOCATION FOR THE BED TO OBTAIN PERFECT STABILITY.)
Repeat Step 3 for other set of slats assembly.
REMARK:
Push Center Rail (J) with
arrow marking to meet with
Footboard (B) as shown.
J
D
STEP 3.5 :
6
NOTE: TIGHTEN SCREWS PERIODCALLY AS SCREWS WILL
BECOME LOOSE WITH USE. CHECK TIGHTNESS OF ALL SCREW
EVERY 6-8 WEEKS.
06
H
B
STEP 3.4 :
4x
REMARK:
Push Slat (D) to the end of Side
support rail and secure with Csk
serew (6) as shown.
4
2
D
STEP 3.1 :
E
Push the side rail(F) &
(G) meet with wooden
slat(F) and fix the CSK
screw (6)
by using the Screw
Driver.
24x
6
STEP 3.2 :
F
D
STEP 3.3 :
Publicité
Table des Matières
