Costway HU10440-Q Mode D'emploi page 4

STEP 1.1
Attach Head Board Leg (C) to Head Board (A) as shown using JCBC BOLT (1) with
Flat Washer (3) and securing with ALLEN KEY (4).
STEP 1.2
Fix the other holes with Screws (6) as shown.
A
RIGHT
NOTE: TIGHTEN SCREWS PERIODCALLY AS SCREWS WILL
BECOME LOOSE WITH USE. CHECK TIGHTNESS OF ALL SCREW
EVERY 6-8 WEEKS.
STEP 2.1
Attach Side Rail (F) & (G) to the Side Rail Leg (I) as shown using JCBC BOLT (1)
with Flat Washer (3) and securing with ALLEN KEY (4) by outside side rail (F) &
(G).
STEP 2.2
Loosen JCBB Bolt at Headboard & Footboard Leg using Allen Key (5). (Do not
tighten them before hooking SET-UPSIDE RAIL TO HEAD BOARD (A) closely, and
push down to fit and tighten them accordingly.)
Repeat step 2.2 with other end of rail to hook onto FOOTBOARD (B).
04
C
LEFT
C
BACK VIEW
STEP 1.1:
4
1
C
3
4x
STEP 1.2:
6
8x