IFM Electronic efector 300 SI2 Notice Utilisateurs page 25

Mount first adapter (D) to the
sensor (A).
A
Step 1
Grease thread and sealing cham-
B
fer of the sensor and of the
adapter with the greasing paste
supplied.
The greasing paste is food-grade
C
).
(UH1 84-201; contains PTFE
Make sure that the O-ring (C) is
correctly positioned and that the
fixing element (B) is mounted.
D
Step 2
Screw the sensor into the adap-
ter. Avoid mechanical influence
on the sealing chamfers.
Step 3
Clamp sensor and adapter into a
clamping device (E). The sealing
chamfers (F) must not be dama-
36
ged. Tighten the sensor with a
E
spanner until you can feel the
F
end stop.
NOTE: A guarantee for a long-term stable and maintenance-free
fitting, with no bug traps in the hygienic sealing of the metal seal
(Aseptoflex connection) is only valid for once-only mounting.
Mount then sensor + adapter to the process connection by the fixing
element.
25