Evolur CHAISE HAUTE POLYVALENTE 4-in-1 Mode D'emploi page 9

BOOSTER SEAT ASSEMBLY - HARNESS ASSEMBLY
3
NOTE - This step comes
assembled.
3a. Take the 5-point harness (G), slide the
Shoulder strap onto the top of the
latch. - Repeat for the other side.
3b. Insert the shoulder
assembly into the buckle - Push until you hear
a "Click".
3c. Repeat for the other side.
3d. To adjust the shoulder and waist straps
slide the strap adjusters.
3e. Press the center buckle to release harness.
3f. Pull the webbing through the slot in the
Seat and the Cushion.
3g. Repeat in reverse order to remove the
harness from the seat - Make sure the straps
are in the correct orientation and not twisted.
www.evolurbaby.com/help
waist strap latch
2a
2b
"Click"
2f
(G)
9