Evolur CHAISE HAUTE POLYVALENTE 4-in-1 Mode D'emploi page 8

BOOSTER SEAT ASSEMBLY - SEAT BASE ASSEMBLY
2
2a. Place the Seat (A) and Seat Base (H) on
each other, make sure they are rightly aligned.
2b. Place one of the Washer (L) above the
center insertion, insert Screw (Q) into the
center insertion after placing the Washer (L).
2c. Take the other Washer (L) and place it at
the center insertion of the Seat Base (H) from
below as depicted in the diagram.
2d. Now, hold the Screw (Q), Washers (L), Seat
(A), and Seat Base (H) together. Insert the
Barrel Nut ( ) from below the Seat base (H).
Rotate and tighten the Barrel Nut ( )
with the help of
provided. Ensure that it is tight and firm.
2e. Place the Hardware Cover (K) on Screw (Q)
to cover the center insertion.
2f. Place the Cushion (B) on the seat.
8
Allen Keys (P)
Center
insertion
www.evolurbaby.com/help
(A)
(H)