Blade Installation - LUCCI FUTURA Serie Guide D'installation

NOTE: The hole in the foam packaging is designed to assist in holding the pre-assembled fan
into position. Insert the canopy cover end into the hole of the foam packaging to sit the motor
facing up during assembly. Fig 4.
 Remove the screws from the light plate and remove the light plate. Fig 4.
Note: For models without light, twist the cover plate to access the blade mount screw holes.
 Before installing the blades, remove the blades screws that are pre fitted.
 Insert the blades through the side slot of motor and align with the 3 holes.
 Secure the blades with 3 blade screws, and ensure that the 3 blade screws are tightened evenly.
Do not over tighten the screws as this ca
Fig 5.
 Replace the light plate and tighten th
Note: For model without light, replace

BLADE INSTALLATION

n damage the blades. Repeat this process for all blades.
e sc rews.
the cover via turning it clockwise.
Fig. 4
6
Fig. 5
Fig. 6