Page 4
17029 wallmount lavatory faucet robinet de lavabo mural Cutting hole General dimensions Prepare the valve Trou de coupe Dimentions générales Préparation de la valve MAX . 7 1/2” x 3” CUTTING HOLE / TROU DE COUPE (gyproc + tile) 7 1/2”...
Page 5
17029 wallmount lavatory faucet robinet de lavabo mural Cartridge replacement Install the faucet Aerator Cleaning Installation du robinet Remplacement de la cartouche Nettoyage de l’aérateur Fig.5 Fig.6 Fig.4 Insert the spout (3) onto the male connec- Start by shutting off water supply lines and To clean the aerator (1), remove it from tor, and secure it with the set screw.
Care Entretien To clean your Aquabrass faucet or accessory, wash with a wet nonabrasive soapy cloth. Then wipe dry with a soft towel or cloth. We recommend this be done on a regular basis. DO NOT USE ANY ABRASIVE, CHEMICAL OR CORROSIVE, POWDER OR ANY OTHER STRONG CLEANERS INCLUDING DETERGENTS, WINDOW CLEANERS AND DISINFECTANTS ON YOUR Aquabrass PRODUCT as they will destroy the finish and therefore VOID THE WARRANTY.
- Aquabrass polished chrome and brushed nickel finishes are warranted for the life of the product to the original purchaser. All other finishes will be war- ranted for five years (Satin Nickel Natural [#210] is designed to develop a patina over time). Raw Brass (#400) is a living finish for which there is no warranty Normal wear and tear is not covered by this warranty.