Category Indication
Contrast
Contrast
LCD Type
Display type
Font Type
Font type
Tag
Tag display
IF Band
Intermediate
frequency band
Ext Input *
6
External input
Amp Gain
Amplifier gain
control
Rear Spk *
7
Rear speaker output
*
4
Depends on the "Dimmer" setting.
*
5
Not applicable for folder/file/Tag name display if "Language" is set to "(Traditional Chinese)," "(Simplified Chinese),"
"(Korean)," "(Thai)," "(Arabic)," or "(Persian)." Depending on the recording method of the folder/file/Tag name, the
setting may or may not apply if "Language" is set to "Auto."
*
6
Displayed only when one of the following sources is selected—TUNER, DISC, USB, LINE IN, AV IN, or Bluetooth.
*
7
Displayed only when Dual Zone is activated (see page 25).
Item
Setting, [reference page]
(
: Initial)
1 – 10
: Adjust the display contrast to make the display indications
Initial: 5
clear and legible.
• Auto
: Positive pattern will be selected during the day time *
negative pattern will be used during the night time *
• Positive
: Positive pattern of the display.
• Negative
: Negative pattern of the display.
• 1
: Select the font type used on the display.
• 2 *
5
• On
: Shows the tag while playing MP3/WMA/AAC/WAV tracks.
• Off
: Cancels.
• Auto
: Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
• Wide
: Subject to interference noises from adjacent stations, but
sound quality will not be degraded and the stereo effect will
remain.
• Changer
: To use a JVC CD changer, [32], or an Apple iPod, [33].
• Ext In
: To use any other external component, [35].
• High PWR
: Volume 00 – Volume 50
• Low PWR
: Volume 00 – Volume 30 (Select if the maximum power of each
speaker is less than 50 W to prevent damaging the speaker.)
• On
: Select this to turn on the rear speaker output.
• Off
: Cancels.
; while
4
.
4
Continued on the next page
SETTINGS
41