Publicité
1.
Locate 2 Panels - C/G and Bottom Plate ( H ) Align holes in all panels
and insert M6 X 30 Screw ( AA) Loosely tighten with phillips screwdriver
DO NOT OVER TIGHTEN as you will need to adjust the panels to ensure
proper alignment.
AA
M6 X 30 Screw
2.
Turn over the assembled panels and Bottom Plate. Assembled the
back panel (F) with M6 X 35.
BB
M6 X 35 Screw
3.
Assembled the Door Bracket to side panel (C/F) with using M6 X 12.
CC
M6 X 12 Screw
4.
Attach the Table Top (B) to the assembled side panels. Align the holes
in the Table Top (B) with the holes at the top of the assembled side
Panels and insert M8 X 16 Bolts (DD) through M8 Washer (EE) and
through holes. Tighten with Wrench B (FF). DO NOT OVER TIGHTEN as
you will need to adjust the holes to ensure proper alignment.
DD
M8 X 16 Bolts
GG
M8 Washer
X6
X4
X2
X4
X4
7
ASSEMBLY INSTRUCTIONS
Publicité
