Wiring - Crimestopper Security Products BSD-200 Mode D'emploi

Mounting the MCU (Main Control Unit)
The system is designed to have the MCU mounted in the rear of the
vehicle. Most vehicles have access to the turn signals and reverse trigger
in the rear.
1. The MCU should be mounted on the driver's side of the vehicle.
Before mounting the MCU be sure to clean the area with an alcohol
prep pad helping the adhesive stick better.
2. The main harness should run down the driver's side of the vehicle.
3. The main harness running to the front of the vehicle contains
Ignition, Audible Alert and Left/Right Visual Alert connections. The
ignition wire comes with an inline 2A fuse already installed.
All manuals and user guides at all-guides.com
mounting mcu/wiring
6