Eng - AENO GS2 Manuel De L'utilisateur

ENG

Portable steamer AENO GS2, GS2-UK is designed to remove creases and
wrinkles in the fabric with a powerful stream of steam.
Technical Specifications
Supply voltage: 220–240 V~; Frequency: 50/60 Hz. Power: 1190.0 W. Dimensions
(L x W x H): 96 mm × 95 mm × 408 mm. Water tank capacity: 0,11 l. Steam
supply: 24 g/min. Steam temperature: up to +150 °C. Steam pressure: 0.4 bar.
Continuous operation time: 7–12 min. Operating conditions: temperature -20–
70 °C, humidity 0–93 %.
Scope of supply (figure A)
AENO steamer (1), measuring cup (3), glove (4), case (5), quick start guide,
warranty card.
Limitations and Warnings
WARNING! The unit connected to the mains is live even after it has been
switched off via the power button (6) (figure B). Unplug it immediately after
use, before cleaning, filling and emptying the water tank.
Do not allow the device to come into contact with water. Never leave the
appliance unattended while it is plugged in. Do not allow children to use or
play with the device. Do not operate a damaged steamer. Use the device
indoors only. Unplug the unit using the power plug, not the cord. Do not use
an extension cord. Use only drinking water, preferably distilled water. Do not
switch on the device with an empty tank. Do not add vinegar, detergents,
chemicals or fragrances to the water. The steaming head gets hot during
operation, do not touch it. Do not point the steaming head against people.
Never steam clothes on a person. Check care label before steaming. To avoid
burns, wear a glove (4) on the hand holding the garment while steaming.
Before you begin
Unpack the device. Do not plug the unit in until you have filled the water
tank (2) according to figure C.
6 www.aeno.com/documents