Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2.Never use this sander for wet sanding or liquid polishing. Failure to follow
this rule may result in risk of electrical shock.
3.Always inspect and remove all nails and screws etc from timber before
sanding.
4.Ensure the workpiece is firmly clamped to prevent movement.
5.Your sander is a hand held tool, do not clamp your finishing sander.
6.Never stop the sander by applying a force to the base plate.
7.Only use sanding paper in good condition. Do not use torn or worn sanding
paper.
8.Do not eat or drink in the working area of the sander.
9.Do not allow people to enter the working area without wearing a dust mask.
10.Where possible, seal off the working area to contain the dust for later
removal.
11.Always use the appropriate safety equipment that is required for the
product. e.g.
Goggles / Safety Spectacles, Ear defenders (essential with tools with a noise
rating of
over 85 dB(A), Gloves and face masks. In all cases ensure that the safety
equipment is
in good condition.
: 回
Double insulation
The tool is double insulated. This means that all the external metal parts are
electrically
insulated from the mains power supply. Placing insulation barriers between the
electrical
and mechanical components making it unnecessary for the tool to be earthed.
Important note
Remove the mains plug from socket before carrying out, any adjustment or
servicing.
Ensure your mains supply voltage is the same as your tool rating plate voltage.
TECHNICAL DATA
Voltage:
230-240V~50Hz
Input power:
280W
Sanding belt speed:
380m/min
Sanding belt size:
40x303mm
回
Double insulation:
Weight:
1.3kg
Publicité
Table des Matières
