ADA-1031
Guide to Installation and Operation
Front Edge Presentation
Status Indicator
Gain Adjust.
ADA-1031
Configuration
PT1
GAIN adjustment
1 GAIN
Trimmer for fine adjustment of the gain within
PT2
an 2.5 dB range
2 GAIN
JP 1
JP 1 sets the operating mode Single = 1 x 8 or
Dual = 2 (1 x 4)
Connections
ADA-1031 is used with the single rear panel ADA-1031-SRP
that includes 1 input to 4 outputs or with the double rear panel
ADA-1031-DRP that includes 1 input to 8 outputs (single
mode) and 2 x 1 input to 4 outputs (dual mode).
No need to terminate REM-GAIN connector when not used.
SW1
Push Button
Gain Adjust.
Board Presentation