Publicité
12
Secure the base...
1
Turn rocketship on its side.
2
Fit the assembled seat
onto the base. Align
the screw holes.
(4)
3
/
" (1.9 cm)
4
3
Secure using (4)
3
(1.9 cm) screws.
/
"
4
Secure the base to the walls using (6)
These locations DO NOT Have starter holes.
To create a starter hole for screw:
• Place screw in small recess designated for
the screw and tap screw with hammer.
These locations DO NOT Have starter holes.
To create a starter hole for screw:
• Place screw in small recess designated for
the screw and tap screw with hammer.
13
(6)
3
/
" (1.9 cm)
4
/
" (1.9 cm) screws.
3
4
(2)
3
/
" (1.9 cm)
4
4
Secure using (2)
(1.9 cm) screws.
/
"
3
4
Publicité
