Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
You cansolvemanycommonthermoelectriccellarproblemseasily, savingyou the cost of a
possible service call. Try the suggestion below to see if youcansolve the
problembeforecalling service center.
PROBLEM
thermoelectriccellar
operate.
thermoelectriccellaris
enough.
The light does not work.
Vibrations.
The thermoelectriccellarseems to
make to much noise
The doorwill not close properly.
LED could not display.
LED display error.
Bottoms are not functional.
X
SERVICE & IMPORTANT NOTICE
1, This machine isdesigned to beonlyused in "N" climate class (16-32°C)
2, Uponreceipt and inspection of the unit, If the supplycordisdamaged, it must bereplaced
POSSIBLE CAUSE
do
not
Not plugged in usingdifferent voltage. The circuit
breakertripped or ablown fuse.
not
cold
Check the temperature control setting.
Externalenvironmentmayrequire a higher setting.
The dooris open toooften.
The dooris not closedcompletely.
The doorsealdoes not sealproperly.
The thermoelectriccellardoes not have the correct
clearance.
Check the service center.
Check
thermoelectriccellarislevel.
The thermoelectriccellaris not level.
Check the fan.
The thermoelectriccellaris not level.
The doorswerereversed and not properlyinstalled.
The sealisweak.
The shaves out of position.
Main control boarddoes not work.
PCB Problem.
There issomeproblemwith the plug.
Weakquality of display.
Temperature point is out off.
Temperaturecontroller panel isdamaged.
to
assure
that
the
Publicité
Table des Matières
