SAFETY INFORMATION: (Please retain for future reference)
ENG
• Always turn off the mains supply before commencing the installation of this fitting.
• This is a Class 1 product and requires an Earth connection – 230 (240) Volts – 50Hz AC.
• This product must be installed in accordance with the national building regulations, if in doubt consult a qualified electrician.
• This fitting is suitable for installation in Indoor locations only.
• Do not mount the fitting in a damp atmosphere.
• Do not stare at the operating lamp.
• Do not cross the wires during use.
.
• Ensure sufficient access to the fitting to enable safe maintenance
LAMP INFORMATION:
• We recommend LED lamps only.
• If dimming is required, dimmable LED lamps must be used.
Attention: in this case it's necessary to be equipped with a dimmer.
• Do not exceed the maximum rated wattage and bulb shape stated on the lamp holder.
ADDITIONAL INFORMATION:
.
• The length of the supply cable CANNOT be increased
AFTERCARE AND MAINTENANCE:
• Always disconnect power supply when servicing or cleaning.
• Clean only with a dry or slightly damp cloth.
• Do no use any abrasive cloths or cleaners as this may damage the product.