•
The device must be deactivated when you pull the mains plug out of the socket or insert it
in the socket.
•
Always pull on the plug itself and never on the cable!
•
Never move the device by pulling it by the cord. Use the handles.
•
Do not attempt to grease the wheels with lubricants or oil. Otherwise, this may cause
more dust or dirt to accumulate on the wheels.
•
Empty the dust bin after every use. The � lters must also be cleaned regularly to prevent
the motor from being overloaded.
•
Allow the dust bin, dust � lter and exhaust � lter to dry completely before you reinstall
them in the device.
•
Only use original spare parts provided by the manufacturer.
•
Store the device in a cool, dry area that is not accessible to children and animals when not
in use.
Product contents and device overview
1
Suction hose
2
Dust bin
3
Plastic dust � lter (located inside the dust bin)
4
Dust bin bottom
5
Suction hose connector
6
Floor nozzle
7
Dust bin cover with handle
8
Telescoping tube
9
Auxiliary air valve on the suction hose
handle
10 Release button for dust bin
11 Button for cable winder
12 Suction power control
13 Mains plug
14 Bracket for hooking in the � oor nozzle
15 On/Off switch
Not shown:
•
Dust � lter
•
Foam dust � lter
•
Micro � lter
•
Exhaust � lter compartment with HEPA-� lter (below the dust bin)
48