Wall Assembly - Brandson 304339 Mode D'emploi

The following areas should be avoided:
• Places where the temperature falls below -10 °C or rises above 40 °C
• Places with a damp environment
• Places with a lot of dust, dirt or grease deposits
• Behind curtains or furniture
• Positioning in / on air outlet of an oven
• Near fans or air conditioners
• Outside the building
• Directly above a wash basin or a stove
Caution!
The carbon monoxide detector is designed only for interior use. Do not expose
the device to any moisture or rain.
The product does not warn against carbon monoxide poisoning if the batteries
are empty.
Do not open or manipulate the gas detector since this could result in malfunc-
tions.
8. Installation
The carbon monoxide detector is operated with two 1.5V AAA batteries and does
not require any extra wiring. You can install the device either on the wall or place
it on a table, for example.

8.1 Wall assembly

After selecting the installation place and setting it up, ensure that no electrical
wiring or pipelines are present in this area.
Finally, mark the mounting holes and do the drilling at the marked places.
English
19