LEAD dynamic SSW20 Manuel D'utilisation page 7

ENGLISH
4
Shorten
You can shorten your LED STRIP before mounting
by cutting it with a pair of scissors in the places pro-
vided. To further guarantee the IP protection class,
use the silicon cap provided and the silicon adhesive
to protect the cut-off end against moisture.
WARNING: You should never shorten the LED STRIP
while it is connected to the mains. Before short-
ening the strip, disconnect it from the power supply,
otherwise there is a risk of injury or death.
LEAD ENERGY AG Am Stadtbad 37 45219 Essen-Kettwig
5
„Learning"
Button
To reset all settings on your LED STRIP DYNAMIC,
hold down the 'Learning' button on your WiFi con-
troller for approx. 10 seconds until your luminaire
flashes.
Subject to errors and amendments
Reset settings
10 sec.
Information / Technical support: www.lead-energy.com