Setting Up; Remote Control Battery Installation - SoundVision LedTower Li Manuel D'utilisation

EN

4. SETTING UP

1. Take out the speaker body and speaker base carefully from the box.
2. Take out the accessories (1 pc of screw and 1 pc of metal gasket).
3. Fit the base with the body with the 1 hole.
4. Screw the base into the body by hands with the 1 pc of screw.
5. Place the speaker standing on the floor and it's ready to use.
5. REmOTE CONTROl
bATTERY INSTAllATION
Open the back cover , put two batteries AAA
in (check that they are inserted with the
correct polarity) then put the cover on. Aim
at the front end of the reception window of
the amplifier, after that, you can operate the
system easily with the remote control.
Batteries should be inserted with the correct
polarity
6
LedTowerLi