Operating Instruction; Bluetooth Function - SoundVision LedTower Li Manuel D'utilisation

EN

7. OPERATING INSTRUCTION

DOCKING FUNCTION
COmPATIbIlITY
The dock connector on this unit is only compatible with IPhone, IPad mini 4,
and IPad Pro (9.7-inch), all the other Apple device should be connected via
AUX cable.
Attempting to dock other Apple devices may damage the dock and also the
devices.
CHARGING THE APPlE DEVICE
1. The IPhone, IPad mini 4, and IPad Pro (9.7-inch) will charge when it is
docked.
2. For the other apple devices, it can charge via the USB charge port at the
back panel.
DOCKING THE APPlE DEVICE
1. Short touch "SV" button or press "IPhone" button on the remote control to
switch to IPhone mode.
2. Locate the Apple device on the Docking Connector.
3. Unlock the Apple device and select the function you want to play.
4. For the other Apple devices, it can play the music via the Aux-in jack at the
back panel.

blUETOOTH FUNCTION

1. Power on the unit, short press "SV" button on the top panel or " " button
on the remote control to switch to the bluetooth mode, the LED display will
indicate " BT ".
2. Long press "Play/Pause" key on unit around 3-5 second and LED icon" "
will blinking, it meaning the speaker unit ready to Pairing mode.
3. Turn on Bluetooth in your smartphone/tablet , and ensure it at
"SEARCHING DEVICE" mode , Found ledTowerli and select.
4. Once the unit is found, enter password 0000 to connect with smartphone/
tablet (some devices may not need password).
5. The LED icon" " will light up and will hear a sound , if connect was
success,you can start playing music from your device.
6. If the smartphone/tablet cannot find the unit or can't pairing, please power
on again and repeat again the above step.
7. It will auto reconnect the previous paired device when each time entering
into Bluetooth mode, If the unit cannot auto connect the previous paired
device, please restart the Bluetooth in the smartphone/tablet, then follow
above steps to finish connection.
10
LedTowerLi