Basic Tips - Mousetrapper Delta Guide Rapide

1
2
Copy
ENGLISH
Connecting
INSTALLATION
Connect the supplied cable to the USB micro
connector under the product, and connect the
other end to a USB port on the computer. Once
installed, your Delta and its buttons will operate
as shown in figure 2.
CHANGING FROM MAC TO PC
CONFIGURATION
The product is configured for PC on delivery. To
configure it for Mac, simultaneously depress the
lower right button, the lower left button (Copy
and Paste) and the Control Bar for 3–4 seconds.
The LED will flash to confirm the configuration.
Repeat the procedure to change back to PC
configuration.
Zoom in
Click/Select

Basic tips

POSITIONING
Position your Delta between you and your
keyboard. The B key on your keyboard should be
directly in front to the scoll wheel on the Delta,
as shown in figure 1. If you have a thin keyboard,
attach and use the keyboard raisers that comes
in the package with your Delta. Connect them
to your Delta by sliding them into the slots
under the unit. The keyboard should always be
in line with or slightly lower than your Delta.
SCROLLING
There are two ways of scrolling. You can use
the separate scroll wheel or activate auto scroll
on the Control Bar. To activate auto scroll, click
on the scroll wheel and use the Control Bar to
scroll, then deactivate auto scroll by clicking on
the scroll wheel again.
REPLACEMENT OF WRIST SUPPORT
The wrist support can be replaced when it is
worn out. You can order a new via your dealer
or directly from mousetrapper.com
Click/Select
Scroll Right Click
Customising
MT KEYS
To customise the button functions, go to
mtkeys.mousetrapper.com (using Chrome or
Edge) and follow the intructions. Your Delta
has to be connected to your computer. You can
for example choose between functions such
as close window, lock computer, create your
own shortcuts and much more. When you have
changed the settings they will be stored in the
Delta and it will work the same way when you
connect it to a new computer.
Zoom out
Paste