Publicité
Les langues disponibles
Les langues disponibles
OPERATING THE APPLIANCE
Intensive cooling
This appliance has an intensive cooling function. This function decreases the temperature in the
refrigeration compartment as quickly as possible. This is ideal for cooling products that have
just been put into the refrigerator. Use this function when you put a large quantity of food in the
appliance.
Switch on the intensive cooling function
Push (several times) the function button until the corresponding indicator light comes on.
The intensive cooling function is switched on.
Switch off the intensive cooling function
Push (several times) the function button until the corresponding indicator light goes off.
The intensive cooling function is switched off.
When the intensive cooling function is not switched off manually, the function will be
switched off automatically after about 5 hours.
High temperature alarm
The alarm indicator for high temperature flashes when the temperature in the appliance is too
high.
A high temperature can be caused for several reasons:
•
The appliance has been switched on for the first time.
•
The door has been opened for too long or too frequently.
•
The door does not seal properly.
•
Too much fresh food has been put in at the same time.
•
The appliance has been switched on again (for example after a lengthy power failure).
The alarm indicator will continue to flash as long as the temperature is still too high.
Attention; if after 24 hours the alarm indicator still flashes, contact the service
department.
EN 17
Publicité
