Publicité
Les langues disponibles
Les langues disponibles
OPERATING THE APPLIANCE
Switching on the appliance
Push and hold the On/Off button for 5 seconds to switch the appliance on.
The temperature is set to the smallest symbol; the corresponding indicator light comes on.
Attention; each time the appliance is switched on again, it takes a while to reach the
correct temperature. As long as the temperature has not yet been reached (and is
therefore too high), the alarm indicator for high temperature flashes.
Setting the thermostat
The thermostat automatically regulates the inside temperature of both compartments.
Setting the thermostat
Push the On/Off button (several times) to choose a setting.
The corresponding indicator light comes on.
•
The recommended temperature setting is the second largest symbol.
•
The smallest symbol is the highest temperature.
•
The biggest symbol is the lowest temperature.
The recommended temperature of the refrigerator compartment is 4 °C and the
recommended temperature of the frozen compartment is -18 °C.
Switching off the appliance
1. First set the temperature to the smallest symbol.
2. Then push and hold the On/Off button for 5 seconds.
All lights flash three times and the lighting goes off; the appliance is now switched off
(standby).
If the On/Off button is pushed again or pushed too short, all lights will flash three times to
indicate that the appliance is in standby.
EN 16
Publicité
