AquaScape AquaBlox Small Water Mode D'emploi page 9

and run to the overflow location making sure to
maintain a decrease in elevation of 1 inch for
every 10 feet in run of overflow pipe for proper
water flow by gravity.
Managing the overflow will be determined by
the conditions on the site. One easy method of
managing the overflow is to create an infiltration
area using the AquaBlox wrapped in geotextile
®
material. The quantity of AquaBlox
will be based on the site's soil percolation
characteristics. See diagrams for example of
overflow configuration using AquaBlox
be other options based on the site characteristics,
such as discharging the overflow to a drainage
location on the property or directly back into the
storm water drain. Choose the best solution based
on the site's characteristics.
STEP 11
BACKFILL TOP AND FINISH EDGES
The AquaBlox can be covered with a layer of 1½" or larger decorative gravel. Boulders
®
can be placed around the perimeter of the water storage basin to complete the edges
of the basin. The liner edges can be trimmed to at least 3" above the maximum water
level in the basin and backfilled behind the boulders.
Permeable paver applications installed
on top of the water storage basin
require a woven geotextile (item
#30219). The geotextile is laid directly
on top of the exposed AquaBlox
This will provide a base for the paver
screening to be spread.
NOTE: Do not use the inner and
outer Non-Woven Geotextile
Underlayment on top of the
AquaBlox as it will potentially clog.
®
The built-in water level inspection port on the Pondless
buried.
www.graystonecreations.com
706-865-0220
required
®
. There may
®
.
®
Waterfall Vault allows the lid of the Pondless
®
Overflow Bulkhead Connection Overflow Infiltration
Waterfall Vault to be
®
9